Product ID:ITW DRILLS & END MILLS
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005863
MSDS Number: BBTKL

ITW DRILLS & END MILLS/PINE BLUFF, AR 71603

Emergency Phone: (501) 536-2233

Cage: FO150

ITW DRILLS & END MILLS/PINE BLUFF, AR 71603

Cage: FO150

COBALT (SEE SUPPLEMENTAL FOR INGREDIENTS)

RTECS: GW8750000

Fraction By Weight: 0-8%

ACGIH TLV: 0.1 MG/CUM

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 4.2%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

IRON ION (FE +2)

CAS: 15438-31-0

RTECS: NO6925000

OSHA PEL 1 MG/M3 (FE)

ACGIH TLV: 1 MG/M3 (FE); 8990

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: .30%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

NICKEL

RTECS: QA5950000

ACGIH TLV: 1 MG/CUM

Effects of Overexposure:METALLIC TASTE; NAUSEA, TIGHTNESS OF CHEST;
FEVER; IRRIT OF EYES, NOSE, THROAT & SKIN, DEATH.

First Aid:INHALATION: REMOVE TO FRESH AIR, CONSULT PHYS. EYE: FLUSH
W/WATER. GET MEDICAL ATTENTION. SKIN: BRUSH OFF EXCESS DUST. WASH
AREA WELL W/SOAP & WATER. INGESTION: SEEK MEDICAL HELP IF LARGE
QUANTITES OF MATERIAL HAVE BEEN INGESTED.

Flash Point:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT ACCUMULATIONS OF DUSTS & TO KEEP AIRBORNE DUST CONCTRATIONS
AT A MINIMUM.
Other Precautions:THIS MATERIAL IS POTENTIALLY CONTAMINATED WITH
COATINGS SUCH AS OILS FOR PRESERVATIVES & OTHER CONTAMINANTS. IF
THE MATERIALS CONTAMINATED,

Respiratory Protection:IF >TLV, PROVIDE NIOSH APPROVED RESPIRATORS.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:AS REQUIRED
Supplemental Safety and Health
MSDS DATE: 04/86. ALSO CONTAINS: MOLYBDENUM 4.25-9.5%, VANADIUM 1-2%,
TITANIUM, CARBON .83-1.07%, TUNGSTEN 0.5-6.2%, SILIC .2-.3%,
ALUMINUM.

Boiling Pt:B.P. Text:5000F
Spec Gravity:8.2
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS SHAPES, SOLID, METAL ODORLESS

Stability Indicator/Materials to Avoid:YES
REACTS WITH STRON ACIDS TO GENERATE HYDROGEN GAS
Hazardous Decomposition Products:METALLIC OXIDES

Waste Disposal Methods:SOLIDS-SALE AS SCRAP FOR REUSE. DUST,
ETC.-FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS REGARDING
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.